Brother 1300 - Manual (Page 11)

Foot 9
ction Guide 8, 5 & 2 mm
A170
hree feet in this collection,
achine Set-Up:
tings based
is used. Adjust
r the fabric used.
d
N l sew ti used
with all thr te tive
Spring A
S
Optional PQ foot, all t
which are useful for pintucks and topstitching
M
Feed dogs up using one of the three set
on fabric and whether the pin feed
fo
Materials Needed for Sample:
Chambray, three colors of threa
General Sewing Directions:
orma ing instruc
ee feet crea
ons were
d a decora . Sewing
trim.
Specific PQ Sample Directions:
Feed
Dogs Presser
Foot Dial Thread
Tension Stitch
Length
Midweight +/- 4
3.5
Mark and press creases 2 ¼” apart. Sew seam with 8 mm foot. With pleat flat (not laying on garment, sew
again with the 5 mm and then with the 2 mm in other colors. The trimmed pleats will be open. The photo
shows the distance from the edge the foot sews. The pleat could be sewn down to the garment as well.
Brother PQ-Accessories Workbook July 2003 67