Operations on the machine panel – Brother BES-1260 User Manual
Page 14
Advertising
Operations on the machine panel
1. The “Ready” light should be on if the design was sent to the machine.
2. If “HOOP” is displayed on the machine panel, press
.
(Note: This will move the pantograph to match the position of the design in the hoop from the computer.)
3. To trace the design in the hoop, press
(Note: This step is to reconfirm that the design does fit in the hoop attached to the machine.)
4. Press the
button to start the machine.
Advertising
This manual is related to the following products: