Bogen M-CLASS AMPLIFIER M450 - Manual (Page 18)

Specifications
* Both channels driven at nominal line voltage 120V AC 60Hz.
1
5
Power Output
70V mono 1 200W @ 4 ohms 900W @ 5.5 ohms 600W @ 8 ohms
4-ohm 600W per channel* 450W per channel* 300W per channel*
8-ohm 400W per channel* 300W per channel* 200W per channel*
Input Sensitivity 1 .225V 1 .06V 0.866V
S/N Ratio (20K BW) 1 09dB ref. 8 ohms, F.P. 1 06dB ref. 8 ohms, F.P 1 03dB ref. 8 ohms, F.P
Class of Operation H H AB
Product Weight 46 lbs. 44 lbs. 41 lbs.
Connectors: AC Power 20A line cord 1 5A line cord 1 5A line cord
Output 5-pin "touch-proof" Barrier Strip, RCA Pre- & Post-EQ Output
Power Bandwidth 20-40kHz .5% THD
THD @ 1kHz rated power less than .02%
Load Impedance 4-8 ohms, 70V
Minimum Load Impedance (Stereo) 3.2 ohms
Frequency Response @ 1 watt 20-20KHz +/- 0.25dB
Output Regulation, 1 kHz direct 0.5dB @ 8 ohms
1 kHz bridged 1 .5dB @ 70V
Inputs BAL1S Standard, other modular input types available
AC Input Voltage Range 95-130V AC, 60 Hz
Indicators Status (On/Protect/Sleep), Clip/Limit, Signal
Temperature Range 1 5 to 105 degrees F
Cooling Forced Air Variable Speed Fan
Physical Dimensions (W x H x D) 1 7" x 3.5" x 16"
Protection RF, DC, Low-frequency,Thermal, Low-impedance, Circuit Breaker, Short Circuit
Special Features Sleep Mode, Back-Slope regulation, Stereo, Dual Mono,
70V Mono Operation,Toroidal Power Transformer
M600 M450 M300