Philips Satinelle Epilierer - Manual (Page 13)

Problem Cause Solution
The appliance
does not
work.
The socket to
which the
appliance is
connected is not
live.
Make sure the socket you use is
live. If you use a socket in a
bathroom cabinet, you may need
to switch on the light to activate
the socket.
The appliance is
not switched on.
Make sure that the appliance is
plugged in and switched on.
You did not
attach the
epilating head
correctly.
Place the epilating head on the
appliance and press it onto the
appliance until it snaps home
(‘click’).
Skin irritation
occurs.
You used the
epilator for the
first time or after
a long period of
disuse.
Some skin irritation may occur the
first few times you use the
appliance. This is absolutely normal
and usually disappears quickly. For
tips to reduce skin irritation, see
the first section of chapter ‘Using
the appliance’. Also make sure you
keep the epilating head clean.
The cooling
glove is not
cold enough.
You did not put
the ice gel pad in
the freezer or
freezing
compartment.
Put the ice gel pad in the freezer
or freezing compartment (***) for
at least 2 hours. Do not store
the ice gel pad in the refrigerator.
You did not
freeze the ice gel
pad long enough.
Put the ice gel pad without the
cooling glove in the freezer or
freezing compartment (***) for at
least 2 hours.
EnglisH 1