BenQ PB7200 - Manual (Page 32)

Troubleshooting 28
BenQ PB7200/ PB7220/ PB7100 User’s Manual
TROUBLESHOOTING
Common Problems & Solutions
NO POWER
Try these solutions:
•
Make sure the power cord is inserted snuged into the AC adapter socket.
• Make sure the power cord is inserted snuged into the power outlet.
• Toggle the power switch to the position “1”.
• Wait two minutes after the projector is turned off before turning the projector
back on.
NO PICTURE
Try these solutions:
•
Check for the proper input source.
• Ensure all cables are connected properly.
• Adjust the brightness and contrast.
• Remove the lens cap.
TRAPEZOID IMAGE ON THE SCREEN
Try these solutions:
•
Reposition the unit to improve its angle on the screen.
• Use the Keystone correction key on the control panel of the projector or the
remote control unit.
POOR COLOR
Try these solutions:
•
Select the correct video system.
• Adjust brightness, contrast, or saturation.
BLURRED IMAGE
Try these solutions:
•
Press Auto on the control panel of the projector or the remote control unit to
get better picture quality.
• Adjust the focus.
• Reposition the unit to improve its projection angle.
• Ensure the distance between the unit and screen is within the adjustment range of
the lens.