Vitek VT-1374 - Manual (Page 6)

6
ENGLISH
Information on the display
Charging
After connecting the charger to AC power, the display
will light, the charging symbol will appear, and the
shaver will beep 5 times to confirm the beginning of
the charging cycle. When the charger is disconnected
from AC power, the charging symbol will disappear in
10 seconds, and in 20 seconds, the display backlight
will go out.
The display will show the working time left and the
charge level of the rechargeable batteries.
Full charge
When the rechargeable batteries are fully charged,
the display will show the working time left is 40 min-
utes and the battery charge level is 100.
Shaver working
time left
The numbers on the display show how much working
time is left based on the charge in the batteries. The
charge level indicator shows the status of the
rechargeable batteries.
Insufficient
charging of
rechargeable
batteries
If the rechargeable batteries are not sufficiently
charged, the indicator begins to blink after the num-
ber 3; the charger indicator will appear.
The shaver automatically shuts off when the number 0
appears on the display.
Cleaning symbol
The blinking symbol on the display that looks like a
water tap indicates that the shaver needs to be
cleaned. The symbol will blink on the display for 30
seconds and beep 5 times to alert you to the need for
cleaning the shaver.
Clean the shaver no less frequently than once every 3
days.
Vt-1374.qxd 24.01.05 12:47 Page 6