Brother HL 1650 - Manual (Page 133)

4-12
The following DIMM size can be installed:
• 16 Mbyte TECHWORKS PM-HP 16M-BR
• 32 Mbyte TECHWORKS PM-HP 32M-BR
• 64 Mbyte TECHWORKS PM-HP 64M-BR
• 128 Mbyte TECHWORKS PM-HP 128M-BR
In general, DIMM must have the following specifications:
Type: 100 pin and 32 bit output
CAS Lantency 2 or 3
Clock Frequency 66MHz or more
Capacity: 16, 32, 64 Mbyte or 128 Mbyte
Height: 46mm (1.8 inches) or less
Parity NONE
Dram Type: SDRAM 4 Bank
SDRAM can be used.
Note
•
For more information, consult the dealer where you purchased the
printer.
•
For the latest information, please visit our user support web site.