Brother HL 1650 - Manual (Page 113)

CHAPTER 3 CONTROL PANEL
3-33
™ Set IP Address
INFORMATION
↓ Press the + or – switch to select the “NETWORK” menu.
NETWORK
↓ Press the Set switch.
TCP/IP
↓ Press the Set switch.
TCP/IP ENABLE
↓ Press the + switch.
IP ADDRESS=
↓ Press the Set switch.
19 2 .0.0.192 ✲
↓
The last number in the digit which you can change is blinking.
Press the
+ or – switch to increase or decrease the number.
Press the Set switch to go to next digit.
123. 0 .0.192
↓ Repeat this until you have set your IP address.
123.45.67.8 9
↓ Press the Set switch to complete the IP address.
123.45.67.89 ✲
An asterisk appears at the end of the display.