Beko C7 - Manual (Page 21)

20
If you have an S-Video player you can
connect it to SCART socket 2
via an adaptor from scart to
S-Video/PHONO audio (not supplied).
S-Video Player
Plug a coaxial plug into the RF out socket on
the rear of the video recorder and plug the
other end into the aerial socket of the TV.
Switch on the video recorder and the TV.
Play a prerecorded tape
or
If your video recorder has a test signal, switch
it on. (Refer to the video recorder user guide).
See ‘Tuning the TV’ and carry out the tuning
procedure for the video recorder on the TV.
Select a programme number 0 or between 55
and 99.
Press the AV button three times
to select AV2S (available on two
scart models).
Plug the S-Video plug into the S-Video
socket and the audio leads into the audio
sockets.
You can also connect it through the
S-Video socket of the TV (optional).
Via PHONO lead and S-Video socket
Via aerial socket
Make sure the TV and video recorder are
both switched off.
Unplug the aerial lead from the TV and plug
it into the aerial socket on the video
recorder (if fitted).
Press the AV button repetitively
to select AV3-S by two scart
models or AV2-S by one scart
models.
R
L
MONO
VIDEO
R
L
MONO
VIDEO
S-Video In
R
L
AUDIO OUT
AV1
AV2