Vitek VT-3473 GY - Manual (Page 6)

In play mode In stop mode
9 Press once Press twice Press once
Back to the Previous track Previous track
begining of
the current
track
: Next track Next track
To search by music fragment, press and hold the NEXT but
ton (8) to search forward, or the BACK button (7) to search
backward.
NOTE: When searching by music fragment, the track will be
played in the Fast Play mode.
To repeat a track or entire disc
• Press the PLAY MODE button (16), to activate the
REPEAT function for the current track.
• Press the button again to activate the REPEAT ALL
tracks function.
• Turn off the REPEAT function by pressing the PLAY
MODE button (16) again.
Random Playback Function
To activate the random playback mode, in the CD stop mode
press the PLAY MODE button (16) three times, ("RANDOM"
will appear on the LED display), after which press the
PLAY/PAUSE button (10). To turn off the function, press PLAY
MODE button (16) once again.
PROGRAM MODE
The device allows programming tracks (up to 20 tracks) in
any order, first select the CD Stop mode by pressing the
STOP button.
1. Press the PROG button. (17) once. ("PROG" will flash on
the LED display.)
2. Press the NEXT (8) or BACK (7) button to select a
desired track.
3. Press the PROG button. (17) to add the selected track to
the program.
4. Continue programming, repeating steps 2 and 3.
Programming is finished.
5. To start playback, press the PLAY/PAUSE button (10).
Viewing the program
Press the PROG button. (17). Numbers of programmed
tracks will be shown on the LED display.
Clearing the program
To clear the program from the memory, press the STOP but
ton (11) twice or open the CD compartment door
MP3 DISC PLAYBACK
1. Set the Function switch (23) into CD position.
2. If there is no disc inside, or the disc is damaged or
inserted incorrectly, "no" will appear on the LED display.
Loading a Disc
1. Open the CD compartment door (5).
2. Insert the disc and close the door.
The system starts reading the disc.
Note: Make sure that the disc is inserted correctly.
This device supports CD R / RW discs.
Playing Discs
1. Press the FOLDER UP or DN buttons (13) or (14) to
choose the desired folder.
2. To select the desired track, press the NEXT (7) or BACK
(8) button.
3. To start playback, press the PLAY/PAUSE button (10).
Pause Playback
To pause playback, press the PLAY/PAUSE button (10) dur
ing the disc playback. To resume playback, press the
PLAY/PAUSE button (10) again.
Stop playback
To stop playback, press the STOP button (11).
MP3 PROGRAM PLAYBACK
The player allows programming up to 10 MP3 tracks in any
order.
1. When the CD stop mode press the PROG button (17)
once.
2. Press FOLDER UP (13) or FOLDER DN (14) button to
select the needed folder.
3. Press the NEXT (8) or (7) button to select a track
4. Again press the PROG button (17) to include the selected
track into the program.
5. To continue programming, repeat the steps 2 and 3.
Programming is finished
6. To start the program playback, press the PLAY/PAUSE
button (10).
Viewing the program
Press the PROG. button (17). The numbers of programmed
tracks will be shown on the display.
Clearing the program
To clear the program, press the STOP button (11) or open
the CD compartment door..
ENGLISH
6
3473.qxd 26.07.05 11:13 Page 6