Brother HL 4570CDWT - Manual (Page 81)

Control Panel
75
3
HP LaserJet Font No. I000
.../I059*.../I071
Font Pitch 0.44
/10*.../99.99
Font Point 4.00
/12*.../999.75
Symbol Set PC-8
*... Sets the symbol set or the character
set.
Table Print
Prints code table.
If Change Emulation appears on
the LCD, choose Auto or
HP LaserJet
in Emulation of
Print Menu
.
(See page 74.)
Auto LF Off
*/On ON: CR i CR+LF, OFF: CR i CR
Auto CR Off
*/On ON: LF i LF+CR, FF i FF+CR, or
VT i VT+CR
OFF: LF i LF, FF i FF, or VT i VT
Auto WRAP Off
*/On Chooses whether a line feed and
carriage return will happen when the
machine reaches the right margin.
Auto SKIP On
*/Off Chooses whether a line feed and
carriage return will happen when the
machine position reaches the bottom
margin.
Left Margin ##
Sets the left margin at column 0 to 70
columns at 10 cpi.
Right Margin ##
Sets the right margin at column 10 to
80 columns at 10 cpi.
Top Margin #.##
Sets the top margin at a distance
from the top edge of the paper: 0,
0.33, 0.5, 1.0, 1.5 or 2.0 inches. The
default setting is 0.5 inches.
Bottom Margin #.##
Sets the bottom margin at a distance
from the bottom edge of the paper: 0,
0.33, 0.5, 1.0, 1.5 or 2.0 inches. The
default setting is 0.5 inches.
Lines ###
Sets the number of lines on each
page from 5 to 128 lines.
BR-Script 3 Error Print On
*/Off
CAPT Off
*/On
Print Menu (continued)
Submenu Menu Selections Options Descriptions
The factory settings are shown in Bold with an asterisk.