Bosch FSM-2000 - Manual (Page 15)

Fire Monitoring System Start the Fire Monitoring System | en 15
Bosch Security Systems Installation Guide F.01U.032.785 | A3 | 2007.05
3 Start the Fire Monitoring System
Starting the server
After successful configuration, start the server.
X
To do this, click the Start button in the System start/stop
tab. The server is started when the status display lights up
green and all operators are displayed.
Logging on to the client
Finally, perform the following steps to log on to the client:
1. Open Internet Explorer.
2. Enter the address according to the following pattern:
http:\\server name (see Section Configuration). A log-on
window appears.
3. Enter Administrator as the user name and password.
4. Start with your desired operations.
i
NOTICE!
The first log-on to the client can take a while, as the required
software components are being loaded.