Baja Marine 192 Islander - Manual (Page 42)

3.6
s
eCtIon
3 • u
sIng
y
our
B
oat
192 Islander ®
10. s
TeerinG
s
YsTeM
The steering system is an enclosed push-pull
cable that is hydraulically assisted (power steering)
at the stern drive end. ThE CaBlE anD ITs
COnnECTIOns TO ThE sTEERIng WhEEl anD
TO ThE OUT DRIVE MUsT BE InsPECTED aT
lEasT TWICE a yEaR By yOUR BaJa DEalER.
see section 8 of this manual for inspection, service
and maintenance recommendations.
The power steering pump fluid level MUST be
checked every time prior to using the boat. Refer
to the steering system information in your Owner’s
Packet.
9. s
ToppinG The
e
nGine
1. Move level to neutral
position, which is located
in the center. let engine
idle for about 5 minutes
to allow engine to cool
down.
2. Turn ignition keys
counter clockwise to
turn off engine.
POWER sTEERIng
CylInDER
sTEERIng CaBlE FlUID
RETURn lInE
FlUID
PREssURE
lInE
FlUID
RTURn
lInE
sTEERIng WhEEl
ChECk & aDD
FlUID hERE
hElM
sTEERIng RaCk
p
ower
s
teerIng
s
ysteM
(F
Ig
3.6.4)
(
FIg
. 3.6.2)
Failure of the steering system will cause loss of
control of your boat. Any change in steering such as
looseness, tightness, binding, etc., must be checked
immediately by your Baja dealer.
! WARNING
(FIg. 3.6.1)