Philips SENSEO® Viva Café Premium Kaffeepadmaschine - Manual (Page 10)

7 Press the on/off button 3.
, The light ring around the on/off button lights up to indicate that you
have to flush the machine.
8 To start flushing, press the 1-cup button q and the 2-cup button
qq briefly at the same time to start the flushing cycle.
Never interrupt the flushing cycle halfway. If you do, the boiler does not
fill itself properly.
, The light ring around the on/off button starts flashing to indicate that
the flushing cycle has started. The flushing cycle takes approx. 1.5 to
2.5 minutes.
, During the flushing cycle, the boiler fills itself with water from the
water reservoir and cold water comes out of the coffee spout.
During the flushing cycle, the machine produces more noise than
during a regular brewing cycle.
, When all the water in the water reservoir has been used up, the
flushing cycle is finished and the machine switches off.
9 Clean the coffee spout, the coffee collector and the pod holders with
hot water and some washing-up liquid or in the dishwasher. Clean
the water reservoir thoroughly in hot water, if necessary with some
washing-up liquid, or in the dishwasher.
now your Philips sEnsEO ® coffee machine is ready for use.
Note: If the machine does not work, repeat steps 1-8. Do not interrupt the
flushing cycle.
Brewing SENSEO ® coffee
tips for the best sEnsEO ® quality
- Use fresh water every time.
- Use the SENSEO ® coffee pods that have been specially developed by
Douwe Egberts for your SENSEO ® coffee machine for a full, round
taste. The Douwe Egberts SENSEO ® coffee pods stay fresh longer if
you store them in an airtight storage container.
- To make sure that the coffee always tastes optimally, rinse the pod
holders, the coffee collector and the coffee spout regularly.
- The SENSEO ® coffee tastes best if you stir it before you drink it.
EnglisH
10