Bush Hog TOUGH 2715Legend - Manual (Page 3)

1. TOUGH EZ Clean Double Deck sheds water and
debris — decks total over 1⁄4-inch thick steel and are tied
directly to strong backs. They are curved to shed water and
debris and have drain holes for condensation.
2. TOUGH Between Deck Structure absorbs shock
for long deck life—3/8-inch tie bars connect hinge rails
and hydraulic cylinder base mounting lugs into one
structure. Hydraulic cylinder lugs on wings are tied into
gearbox stand that extends from the side band to
the hinge rail to form one single strong structure.
3. TOUGH Distribution Baffles keep debris in each
cutting circle to prevent windrows. Baffles are constructed
of 7-gauge steel and attached with bolts for quick removal.
4. TOUGH Spring Steel Cushions absorb shock loads.
Cushions are strategically located at the axle where shock
loads occur.
5. TOUGH Axles that can take bruising punishment.
Axles are equipped with easy-to-reach grease fittings and
use strong retaining bolt through the pivot pin.
6. TOUGH Wing Skids that last. Skids are built of
7-gauge steel, mounted on the outside of wings and
turned up at 45 degree angle to reduce dig in on turns.
7. TOUGH Pivot Points are built to stand up to
constant heavy loads. Pivot points are easy to grease
from the top, made of hardened steel, use replaceable
bushings, feature Grade 5 steel pins, use 3/8-inch
steel gussets.
8. TOUGH Long-Lasting Turnbuckles make adjust-
ments easy now and for years to come. Turnbuckles are
easy to reach for leveling adjustments and easy to
grease for long life and easy turning.
9. TOUGH Drivelines are built to last. Rugged driveline
is designed for easy maintenance. Rear and front grease
fitting align so they are easy and quick to service.
10. TOUGH Perma-Level® Hitch remains level on
tractor drawbar. Bolt retainer adds additional strength
to pivot pin.
Bush Hog TOUGH Features
Mean Better Performance
Today and Tomorrow
10 Bush Hog TOUGH Features