Vitek VT-3479 BK - Manual (Page 8)

ENGLISH
8
CD/MP3 PLAYER
CD/MP3 Player Playing a CD/MP3
ThisCD-playercan play Audio Discs,MP3 CD-R.
Do not try to play CD-Rewritables,CD-ROM,
CDi,VCD,DVD orcomputerCD.
1. Adjust the source selector to CD.
Display: shows - - Briefly.
2. To open the CD door, press CD OPEN
button.
3. Insert a CD or CD-R with the printed
side facing up and press CD Door
gently to close.
4. To pause playback press . To resume,
press again.
5. To stop CD playback, press STOP .
Note:CD/MP3 play will also stop when:
- you open the CD compartment;
- you select RADIO sound source;
-the CD/MP3 has reached to the end.
Selecting a different track
During playback you can use
or to select a
particular track.
• If you have selected a track number in the
stop or pause position, press
to start
playback.
• Press once briefly for the next track, or
press repeatedly until the desired track
number appears in the display.
• Press once briefly to return to the
back track
Finding a passage within a track
1. Press and hold down
or
• The CD is played at high speed and low vol-
ume.
2. When you recognize the passage you want
release or .
Normal playback resumes.
Playing tracks in random order After press
the random button, the tracks will be played
in random order
CD REPEAT
You can play one track or all tracks on the
disc repeatedly. To Repeat a single Track1.
Press REPEAT button once in play, CD RE-
PEAT indicator on the display will be flashing
in the display.
The current track will be played over and
over again till you press STOP button.
2. To cancel repeat play, press REPEAT button
twice, CD REPEAT indicator goes off.
To Repeat All the Tracks
1. Press REPEAT button twice in play, CD RE-
PEAT indicator on the display will be steady
on in the display, all tracks on the disc will
be played over and over again till you press
STOP button.
2. To cancel repeat play, press REPEAT button
once, CD REPEAT indicator goes off. Note:
Repeat function also can be done in stop
mode.
MAINTENANCE & SAFETY
Precautions & General Maintenance
•
Place the set on a hard and flat surface so
that the system does not tilt.
• Do not expose the set, batteries or CDs to
humidity, rain, sand or excessive heat
caused by heating equipment or direct
sunlight.
• Do not cover the set. Adequate ventilation
with a minimum gap of 6 inches between the
ventilation holes and surrounding surfaces
is necessary to prevent heat build-up.
• The mechanical parts of the set contain self-
lubricating bearings and must not be oiled
or lubricated.
• To clean the set, use a soft dry cloth. Do not
use any cleaning agents containing alcohol,
ammonia, benzene or abrasives as these
may harm the housing.
CD player and CD handling
•
The lens of the CD player should never be
touched!
• Sudden changes in the surrounding tem-
perature can cause condensation to form
and the lens
of your CD player to cloud over. Playing a
CD is then not possible. Do not attempt to
clean the lens but leave the set in a warm
environment until the moisture evaporates.
• Always close the CD door to keep the CD
compartment dust-free. To clean, dust the
compartment with a soft dry cloth.
• To clean the CD, wipe in a straight line from
the centre towards the edge using a soft,
lint-free cloth. Do not use cleaning agents
as they may damage the disc.
• Never write on a CD or attach any stickers to
3479.indd 8 3479.indd 8 11.04.2006 16:36:13 11.04.2006 16:36:13