Belkin Iplay Powerline HD Networking Adapter F5D4078 User Manual
Page 7
5
Play Powerline HD Networking Adapter
sections
table of contents
1
3
4
INsTAllINg AND seTTINg UP THe ADAPTers
2
overview
installation of the Play Powerline HD networking Adapter takes only
seconds and does not require setting up long wires throughout the
house . Simply plug the units directly into any available wall outlet and
connect to any device with an ethernet port . Users have the option to
randomly change the security password for their powerline network .
Hardware setup
1.
Plug your network cable into the device’s rJ45 network adapter
port .
2.
Plug the other end of your network cable into the rJ45 port located
at the back of the Adapter .
3.
Plug the power cable or wall adapter into the power connector at
the back of the Adapter .
4.
insert the power plug of your power cable or wall adapter directly
into a power outlet in the wall .
NoTe: Do not plug the device into a UPs or power strip with
surge protection as they may filter the powerline signal.
5.
repeat this process for the second Adapter .