Belkin AP20500EA3M - Manual (Page 9)

Hookup and Installation
B
elkin
P
ow
er
C
ons
ole
Step 3
Connect Audio Components to the Audio Filter
The Belkin Power Console contains an isolated audio filter that is optimised
to clean and condition the power to all of your audio components. The
audio filter also isolates your audio components from connected video and
high-current audio components.
A. Attach Belkin power cable labels to each component’s power cable
before you plug the cable into the sockets on the Power Console.
B. Connect the power cables of your audio components to any socket
labeled under the “Audio Filter”. Examples of the most common audio
components are listed below:
1. Tape Player
2. Receiver (Preamp)
3. Turntables
Note: You can connect any type of audio component into any of the audio
filter sockets. You are not limited to the components listed above.
8
(*89i\Xb\i <Xik_