Bryston BP6P User Manual

Page 6

Advertising
background image

MOVING MAGNET PHONO EQUALIZATION

MODULE (optional)

Bryston’s optional phono stage circuitry features highly

accurate equalization, extremely low noise and distor-

tion and provides headroom margins sufficient to prevent

overload from any known phono source. If your turntable

provides a separate ground lead system noise may be mini-

mized by connecting it to the ground post adjacent to the

phono inputs on the rear panel.

Input impedance is 50K ohms and sensitivity is 5mV.

DIGITAL AUDIO INPUT MODULE (optional)

The BP6DA model contains one SPDIF compatible digital

audio input. To select the digital audio input, set the rotary

SELECTOR to DAC. The digital-to-analog convertor can

handle input sample rates from 16KHz to 108KHz, and

word lengths of 16, 18, 20 or 24 bits.

VISUAL INDICATORS

The bi-colour LED (light emitting diode) located on the

front panel lights GREEN when the power is on and RED

when the power is on and the output is muted

FRONT PANEL CONTROLS:

● VOLUME CONTROL: Rotary control varies the output

level to the main PREAMP OUT outputs (does not effect

‘TO TAPE’ outputs).

● BALANCE CONTROL: is a tailored-inflection type

which has very gradual action near the center of rota-

tion allowing fine adjustments to the stereo image.

For convenience the electrical center of the control is

detented.

● SOURCE SELECTOR SWITCH: Rotary switch deter-

mines which input will appear at the “TO TAPE” outputs

for recording or processing, as well as determining

which program is available at the Main outputs. (When

the “TAPE/NORMAL” switch is in “Tape” position,

“FROM TAPE” inputs appear at Main Outputs).

● TAPE/NORMAL SWITCH: “Normal” position monitors

whichever input is selected at the rotary SELECTOR

switch. “Tape” position provides monitoring of the

“FROM TAPE input for A/B comparison with the source.

Should an external processor or equalizer be connected

in the tape loop, the ‘TAPE / NORMAL” switch will act

as an in/out switch for the external equipment.

BP6 Preamplifiers

BRYSTON LTD., 677 NEAL DRIVE, P.O. BOX 2170, PETERBOROUGH, ONTARIO CANADA K9J 7Y4

BP6_MANUAL_20060324

Advertising
This manual is related to the following products: