0 e4 system troubleshooting, 4 common problems, 1 communications port error – Bose FREESPACE E4 User Manual

Page 11: 2 no audio in zone

Advertising
background image

68 of 80

8.0 E4 System Troubleshooting

8.4 Common problems

8.4.1 Communications port error

When you receive the communications port error dialog, the
FreeSpace

®

Installer™ software was not able to locate an E4

system on the COM 1 port.

This normally occurs due to one of three reasons:

• The PC and E4 are not connected via a “straight-wired” serial

cable.

• Another software application has control of the serial port.

Applications such as the Palm OS, or other audio applications
control the serial port while they are open. Close these applica-
tions and click the Try Again button.

• The E4 is connected to another communications port. If this is

the case you should select the appropriate COM port and click
the Try Again button.

Programmer’s Note: Before dismissing the “Choose
COM port” dialog, select the COM 2 port and click Try
Again
. Not doing this will cause the COM 1 port to be
locked.

8.4.2 No audio in zone

If the system is powered on and operational, but there is no
sound, check the following:

• Do the front panel LEDs indicate normal operation?

• Is the source operating?

• Is routing correct?

• Is output gain correct?

• Is the output gain muted?

• Is cabling correct?

No audio in zone.

Are the AUDIO

SOURCES indicators

green?

• Make sure that the audio sources

are connected to the E4 LINE in-
puts and that there is an input sig-
nal from the source.

• Using the Installer™ software,

check that the input gain is raised.

• Make sure the source is on.

No

Yes

The amplifier is in “protect” mode.
Disconnect the load and see if the
output indicator changes to green.
If so:

• Check for a short in the output

line,

• Make sure no small strands of

wire are touching other wires,

• Make sure speakers are function-

ing correctly, or

• Using a voltmeter, check for a

voltage drop in the power line
when amplifier is being driven ex-
cessively hard.

See amplifier fault troubleshooting
section for course of action.

Is AMP OUTPUT

indicator red?

Are the

AMP OUTPUTS

indicators green?

Contact Bose

Customer Service.

Yes

No

No

Yes

Advertising