Bissell 6591 - Manual (Page 13)

13
BISSELL Consumer Services
For information about repairs or replacement parts, or questions about your
warranty, call:
BISSELL Consumer Services
1-800-237-7691
Monday - Friday 8 a.m. — 10 p.m. ET
Saturday 9 a.m. — 8 p.m. ET
Or write:
BISSELL Homecare, Inc.
PO Box 3606
Grand Rapids, MI 49501
ATTN: Consumer Services
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It is your warranty.
Suction
Inlet
Air Passageway
Reposition the drive belt on the brush roll. Place ends
of brush roll in slots on sides as shown. Reposition belt
cover and secure with one screw. Reposition faceplate
and secure with two screws.
Low suction or poor pickup may be due to a clog in
the vacuum cleaner. If you notice a change in the
sound of the motor or a reduction in the spinning
action, check for clogs.
Unplug cleaner from electrical outlet.
Empty Dirt Container.
Check Upper Tank for build up or clogs.
Remove the Upper Tank and check the suction inlet for a clog.
Grasp the Quick Reach Handle and lift Hose Wand to separate
from the suction opening. Check for a clog in the Base, the
Wand or the Hose.
Release the Twist 'n Snap Hose from the vacuum by turning
to the left. Straighten the hose and unclog with a long,
narrow object.
If the clog persists, follow the instructions for Checking
the Rotating Floor Brush on pages 11-12 and inspect the
Air Passageway for obstructions.
Maintaining TurboBrush Continued
4.
5.
6.
7.
1.
2.
3.
Hose Wand
Base
Clearing Clogs
4.
ug603-2564_3595_1005.indd 13 ug603-2564_3595_1005.indd 13 1/4/06 9:51:03 AM 1/4/06 9:51:03 AM