Beko 22WLM550DHID - Manual (Page 20)

18
ATV Menu
2. Press button to perform yor selection,the menu of
will display on the screen. Manual Tuning
3. Press to perform yor selection,the menu of will display as below. Program Label
4. Press the numeric buttons to input the numbers directly or press to select the letters.
1. Press in the
setup menu
Manual Tuning button to select
2. Press in the menu Program Labeled SETUP . to select
5. Press to move the cursor.
This option has two functions:
6. Press , or button to confirm and return to previous menu. ENTER LCD-MENU EXIT
1. Set the puency of channel for AFT option.
2. Press
button for 3+ seconds and it will start auto tuning from this frepuency.
1. Select a channel you want to labeled.
NOTE:Before you perform Manual Tuning,you must choose the country where you are by
selecting Country optiom.
This option allows you to perform Manual Tuning.
The current program number.press upper or lower program.
Press to select a corresponding sound system,such as I,DK,BG.
Press to select a corresponding colour system,such as Auto,PAL,SECAM.
Due to weak signals or a wrong antenna configuration,some of the channels may not be tuned
to the best reception condition.AFT function allows you to fine tune channel selected(the
frequency of channel is around the value in
option). Manual Search
This option allows you to label a channel,you can also relabel the programs have been labeled.
Manual Tuning
Program
Sound System
Colour System
AFT(Auto Fine Tune)
Manual Search
Program Label
Program Label
Manual Search MHz .
USING THE FEATURES
U
S
IN
G
T
H
E
F
E
A
T
U
R
E
S
12 19