Blaupunkt BROOKLYN MP35 - Manual (Page 12)

44
Radio mode
This device is equipped with an RDS
radio receiver. Many of the receivable
FM stations broadcast a signal that not
only carries the programme but also
additional information such as the sta-
tion name and programme type (PTY).
The station name appears in the dis-
play as soon as the tuner receives it.
Adjusting the tuner settings
To ensure that the tuner works proper-
ly, the device must be configured for the
region in which you are using it. You can
choose between Europe (EUROPE),
United States (USA), South America (S-
AMERICA) and Thailand (THAI). By
default, the tuner is set to the region in
which the device was sold. If you en-
counter problems with radio reception,
please check this setting.
The radio functions described in these
operating instructions refer to the EU-
ROPE tuner setting.
➮
Press and hold down the 1 and 5
buttons
9 simultaneously and
switch on the device again by
pressing button
1.
“TUNER” is displayed.
➮
Select your tuner region using the
or button 6.
To save the setting,
➮
switch the device off and on again
or wait approx. 8 seconds. The car
sound system starts with the last
setting activated (radio, CD/MP3,
CD changer or AUX).
Switching to radio mode
If you are in CD/MP3, CD-changer or
AUX mode,
➮
press the BND•TS button
4
or
➮
press the SRC button
; repeated-
ly until the memory bank (e.g.
“FM1”) appears in the display.
RDS functions
The convenient RDS functions AF (Al-
ternative Frequency) and REGIONAL
extend your radio’s range of functions.
● AF: If the RDS function is activat-
ed, the radio automatically tunes
into the best receivable frequency
for the station that is currently set.
● REGIONAL: At certain times, some
radio stations divide their pro-
gramme into regional programmes
providing different content. You can
use the REG function to prevent
the car radio from switching to al-
ternative frequencies that are
broadcasting different programme
content.
Note:
● REGIONAL must be activated/de-
activated separately in the menu.
Switching the RDS function on/off
If you want to use the RDS functions
(AF and REGIONAL),
➮
press and hold down the
TRAF•RDS button
8 for longer
than two seconds.
The RDS function is active when the
RDS symbol is shown in the display.
RADIO MODE
02BrooklynMP35_gb 19.08.2005, 14:45 Uhr 44