Philips SatinPerfect Epilierer - Manual (Page 17)

Problem Cause Solution
The overload
protection is activated
because something
got caught between
the rotating discs or
because you pressed
the appliance too
hard onto your skin.
When the overload protection has been activated,
the speed setting indications flash red. Turn the discs
with your thumb until you can easily remove the
item that is blocking the rotating discs. Then switch
on the appliance again. Do not press the appliance
too hard onto your skin.
The precision
epilator does not
work.
The batteries are
empty or have been
inserted incorrectly.
Replace the batteries or insert them correctly (see
‘Inserting the batteries’ in chapter ‘Using the precision
epilator’).
EnglisH 17