Blaupunkt ATLANTA RCM 169 - Manual (Page 46)

94
Specifications
Amplifier
Output power: 4 x 25 W RMS power
acc. to DIN 45324 at
14.4 V
4 x 40 W max. power
Tuner
Wavebands
FM
: 87.5 – 108 MHz
MW : 531 – 1602 kHz
LW : 153 – 279 kHz
FM sensitivity: 0.7 µ V at 26 dB
signal-to-noise ratio.
FM frequency response:
20 - 16 000 Hz
Tape deck
Frequency response:
30 - 20 000 Hz
Glossary - Technical Terminology
Dolby B NR
The noise reduction system manufactured
under licence from the Dolby Laboratories
Licensing Corporation.
The word DOLBY and the double-D symbol
(
) are trademarks of the DOLBY Labora-
tories.
Cassettes which have been recorded with
Dolby B NR exhibit significantly less tape
noise as well as much greater sound dynam-
ics.
DNC – Dynamic Noise Covering
Automatically boosts the volume of the car
audio system to cover the driving noise.
DSA – Digital Sound Adjustment
The sound is adjusted digitally by a self-ad-
justing equalizer.
DSC – Direct Software Control
With the help of DSC it is possible to adjust
the basic default settings to your own per-
sonal preferences.
ENT(Enter)
Press briefly to accept/store settings.
Subject to modifications!
AF – Alternative Frequency
In RDS this function ensures that the radio
always tunes into the frequency with the best
reception for the station.
AUD – Audio
Sound settings for bass and treble, balance
(left/right) and fader (front/rear).
Autoreverse
See Reverse.
BLS – Blank Skip
Automatically skips longer portions of blank
tape during cassette operation, e.g. at the
end of the tape.
CL – Clear (delete)
Returns to the previous menu item.
CPS – Cassette Program Search
Repeats and skips cassette titles.
Use S-CPS to select specific cassette titles.
AtlantaRCM169 gb 95%® 10.06.2002, 12:30 Uhr 94