Belkin F5D8633-4 - Manual (Page 40)

39 38
Alternate Setup Method
39 38
For Dynamic IP connection:
1. IP assigned by ISP
- Select “No” if your ISP instructed you to use
fixed IP.
2. IP Address
- Enter an IP address assigned by your ISP for the
Router WAN interface.
3. Subnet Mask
- Enter a subnet mask assigned by your ISP.
4. Default Gateway
- Enter a default gateway IP address assigned
by your ISP.
5. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameters here. These identifiers are assigned by
your ISP.
6. Encapsulation - Select the LLC or VC MUX your ISP uses.
Click “Apply Changes” to save and activate your settings. To go
back to the original settings before saving, click “Clear Changes”.
Or click any of the Quick-Navigation links for other options. Your
new settings will not be saved unless your click “Apply Changes”.
(3)
(5)
(1)
(2)
(4)
(6)