Introduction, 1 before you get started, 1 shipment – Behringer EURODESK SX2442FX User Manual

Page 4: 2 initial operation, 3 online registration, Introduction 1, Introduction 4, Before you get started 1.1

Advertising
background image

EURODESK SX3242FX/SX2442FX

Introduction

4

Introduction

1.

Congratulations! With the EURODESK you have acquired a state-

of-the-art mixing console that sets new standards. Right from the

very start it has been our goal to design a revolutionary unit that

can be used for a great variety of applications. And indeed, this

overwhelming mixing console gives you plenty of functionality and

a broad range of connection and expansion options.
BEHRINGER is a company with its roots in professional recording

studio technology. For many years now we have been successful

in developing products for studio and live use. These include mi-

crophones and studio gear of all kinds (compressors, enhancers,

noise gates, tube processors, headphone amplifiers, digital effects,

DI boxes, etc.), monitor and P.A. speakers as well as professional

live and recording mixers. Our entire technical know-how has gone

into your EURODESK mixing console.
FBQ Feedback Detection System

One of the most outstanding features of this console

is the FBQ Feedback Detection System, which is

part of the graphic equalizer. This ingenious circuit

makes it possible to detect and subsequently

eliminate feedback frequencies very quickly. FBQ

increases the brightness of the EQ fader LEDs for the frequency

bands where feedback is occurring. What used to be a tedious

search for feedback frequencies is now mere child’s play.
XENYX Mic Preamps

The microphone channels feature high-end XENYX

Mic Preamps that compare well with costly outboard

preamps in terms of sound quality and dynamics and

boast the following features:

130 dB dynamic range for an incredible amount of

=

headroom
A bandwidth ranging from below 10 Hz to over 200 kHz for

=

crystal-clear reproduction of even the finest nuances
The extremely low-noise and distortion-free circuitry guaran-

=

tees absolutely natural and transparent signal reproduction
They are perfectly matched to every conceivable microphone

=

with up to 60 dB gain and +48 volt phantom power supply
They enable you to use the greatly extended dynamic range of

=

your 24-bit/192-kHz HD recorder to the full, thereby maintain-

ing optimal audio quality

“British EQ”
The equalizers used for the XENYX Series are based on the

legendary circuitry of top-notch consoles made in Britain, which

are renowned throughout the world for their incredibly warm and

musical sound character. Even with extreme gain settings these

equalizers ensure outstanding audio properties.

What is more, the EURODESK comes with two ef-

fects processors using 24-bit A/D and D/A convert-

ers and the effects algorithms of our renowned 19"

multi-effects device VIRTUALIZER PRO DSP2024P.

Each processor offers 99 presets with first-class room

simulations, delay and modulation effects as well as compressor,

tube distortion and numerous other effects available—all with

excellent audio quality!

The mixer is equipped with a state-of-the-art integrat-

ed switch-mode power supply. Unlike conventional

designs, this supply automatically adapts to supply

voltages between 100 and 240 V. With its consider-

ably higher efficiency, it is also more economical in

terms of power consumption than standard power supply units.

Before you get started

1.1

Shipment

1.1.1

Your product was carefully packed at the factory to ensure safe

transport. Nevertheless, if the box is damaged inspect the unit

immediately for signs of damage.

If the unit is damaged please do NOT return it to us,

+

but notify your dealer and the shipping company im-

mediately; otherwise, claims for damage or replacement

may not be granted.

We recommend that you use a flight case to give the unit

+

optimum protection during use or transport.

Always use the original box to prevent damage during

+

storage or transport.

Make sure that children cannot play unsupervised with

+

the unit or its packaging.

Please ensure proper disposal of all packing

+

materials.

Initial operation

1.1.2

Ensure adequate air supply and to avoid overheating do not place

the unit near radiators etc.

Blown fuses must be replaced by fuses of the correct

+

rating! Please refer to the “Specifications” section for

the applicable rating.

For connection to the mains use the enclosed power cord with cold

connector which complies with the relevant safety regulations.

Please make sure that all devices are properly grounded.

+

For your own safety, never remove or disable the ground

conductors from the devices or on the power cords. The

unit must always be connected to the mains outlet with

a protective grounding connection.

We would like to point out that high volume levels

+

may damage your hearing and/or your headphones/

loudspeakers. To avoid switch-on/off thumps from the

console and any downstream devices, always make

sure that your power amp(s) or active speakers are the

last components that are switched on and the first to

be switched off. Always make sure that the appropriate

volume is set.

Important notes concerning installation

The sound quality may diminish within the range of pow-

+

erful broadcasting stations and high-frequency sources.

Increase the distance between the transmitter and the

device and use shielded cables for all connections.

Online Registration

1.1.3

Please register your new BEHRINGER equipment right after your

purchase by visiting http://www.behringer.com and read the terms

and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, it is our intention

to have it repaired as quickly as possible. To arrange for warranty

service, please contact the BEHRINGER retailer from whom the

equipment was purchased. Should your BEHRINGER dealer

not be located in your vicinity, you may directly contact one of

our subsidiaries. Corresponding contact information is included

in the original equipment packaging (Global Contact Information/

European Contact Information). Should your country not be listed,

please contact the distributor nearest you. A list of distributors

can be found in the support area of our website (http://www.

behringer.com).
Registering your purchase and equipment with us helps us process

your repair claims more quickly and efficiently.
Thank you for your cooperation!

Advertising
This manual is related to the following products: