B&K AVR507 - Manual (Page 67)

63
Set the maximum level of Zone 1 (A) - Max level allows you to set a maximum volume level for Zone 1 (A). This
is very useful if you are using speakers that can’t handle the maximum power output from your receiver or if you
simply wish to limit the volume that can be achieved using normal front panel or remote operation.
WARNING - If you set this level too low, the receiver may appear broken (no sound).
From Remote From Front Panel Action
1 À(UP) or §(DOWN) (UP) or (DOWN) move to Max Level
2 ¶ (LEFT) or • (RIGHT) VOLUME KNOB adjust level to desired value
Set the Zone ID for Zone A - Each message transmitted from your remote includes a Product ID Code Set (See
Zone ID), which allows independent command and control of the receiver’s Zones A and B. Set the desired zone
ID number for use with Zone A (default 1). You may not set the Zone A zone ID to the same setting as Zone B
(default 2) or vice versa If you need to set Zone A to the current Zone B setting then you must first set Zone B to
some other Zone ID value.
WARNING - if you change the Zone product ID code set in the receiver without making the corresponding
change to the remote then the remote will no longer appear to work. Refer to the separate remote manual
for details on changing the remote’s product ID code set (“device code”).
From Remote From Front Panel Action
1 À(UP) or §(DOWN) (UP) or (DOWN) move to Zone ID
2 ¶ (LEFT) or • (RIGHT) VOLUME KNOB adjust Zone 1 (A) ID to desired value
Set Zone 1 (A) On Screen display usage - During normal operation, when you make a change to a system
setting or your receiver detects a change to the incoming audio or video, a message is overlaid along the bottom
of your video screen. You can turn off the overlay display from this menu. This will not affect the on-screen
displays when you enter the menu system.
ADVANCED ZONE A SETTINGS
1 Max Level +15 dB
2 Zone ID 1
3 On Screen Display User
4 V1 Output Tape
5 Surround Modes Auto
6 Favorite Recall use ENTER
next item adjust
MENU advanced setup
1 Max Level +15 dB
ZA ZONE ID 1
ADVANCED ZONE A SETTINGS
1 Max Level +15 dB
2 Zone ID 1
3 On Screen Display User
4 V1 Output Tape
5 Surround Modes Auto
6 Favorite Recall use ENTER
next item adjust
MENU advanced setup
2 Zone ID 1
ZA ZONE ID 1