BenQ Z2 - Manual (Page 115)

Menus 99
Adding a sharp to a note
Press to add a sharp '#', which raises the note a semitone.
To remove a sharp from a note, press .
A sharp cannot be added to an E or B note.
Steps for creating a polyphonic ring tone
1. The first time you enter the Composer menu, you will see 8
channels that you can select for editing. Each channel can be
used to save one passage of music that you have created.
Select the channel that you wish to edit to begin composing
the music for this channel.
2. Edit notes according to the procedures described above.
• To modify a note, use the Joystick to move the cursor to
the right of the note that you wish to change. You can
then proceed with adjusting the length, octave, sharp/
unsharp, and so on.
• Press (Clear) to delete a highlighted note.
3. When editing the music in a channel, press (Option) to
access the following options:
• Play
Plays the notes in the channel.
• Instrument
Allows you select the instrument that will play the notes
in the channel.
• Time Beat
Sets the tempo (tempo range: 40 to 200).