Philips BlueTouch-Schmerztherapiegerät - Manual (Page 25)

Problem Possible cause Solution
The charging light does
not start flashing green
when I connect the USB
cable to the computer.
The micro USB plug is not
inserted into the micro
USB socket properly or the
standard USB plug is not
inserted into the USB port of
your computer properly.
Insert the micro USB plug into the micro
USB socket properly and check the
connection to the computer.
Make sure the computer is switched on.
The standard USB plug is
not inserted or not inserted
properly into the USB port of
the computer.
Insert the standard USB plug into the
USB port of the computer properly.
The battery of the laptop into
which you have plugged the
USB cord is running low.
Connect the laptop to the mains.
The BlueTouch Pain
Relief Patch becomes
warm during use.
This is normal. No action required.
Specifications
Model PR3092
Rated voltage (V) 100-240
Rated frequency (Hz) 50-60
Rated input (W) 15
Class Medical device Class IIa
Classification Risk Group 1
Ingress of water IP22
Max. daily dose (J/cm²) < 90 if treatment schedule is followed
Battery type Li-Ion
Operation conditions
Temperature from +10°C to +35°C
Relative humidity from 30% to 90%
Storage conditions
Temperature from -20°C to +35°C
Relative humidity from 30% to 90% (no condensation)
English 25