Britax Super Elite User Manual
Page 9
Versa-Tether
TM
14
Versa-Tether
TM
15
•
NEVER ATTACH A FORWARD FACING TETHER TO A LOCA-
TION THAT IS NOT RECOMMENDED BY YOUR VEHICLE
MANUFACTURER OR TO A LOCATION THAT YOU BELIEVE
IS INCORRECT OR NOT STRONG ENOUGH. IF THE TETHER
COMES LOOSE IN A CRASH, THE METAL HOOK CAN FLY
AROUND AND INJURE SOMEONE IN THE VEHICLE.
• THE TOP TETHER MUST BE USED FOR CHILDREN HEAVIER
THAN 50 lbs.
•
Britax recommends that the tether be used at all times. Using
the tether will improve the stability of your child restraint and
reduce the risk of injury.
•
If your vehicle does not currently have a tether anchor
attachment refer to your vehicle owner’s manual or contact
your vehicle manufacturer for assistance.
•
If a tether anchorage is not available, you should NOT modify
your vehicle without advice from your vehicle manufacturer.
INSTALLING THE VERSA-TETHER
TM
1
Once your child seat is in a secure, seat-belted position locate the
tether and remove from pouch.
2
Lift the silver metal tab on the tether strap out, then fully extend
tether.
3
Locate the tether anchor in your vehicle. Use a tether anchor in
location A or B in the illustration on page 15.
IMPORTANT:
If in doubt about your tether anchorage point or if your
vehicle is not equipped with a tether anchorage point, check your vehi-
cle owner’s manual or contact your vehicle manufacturer for
assistance.
4
Hook the tether to the tether anchor point, then pull on the
tether belt to remove any slack.
5
Verify that there is tension in the tether strap and that child seat
is properly secured.
RELEASING THE VERSA-TETHER
TM
To release the Versa-Tether lift the silver metal tab on the tether
adjuster, then pull.
SE_R03.qxd 2/15/02 12:47 PM Page 16