Brother PT-2730 - Manual (Page 84)

TROUBLESHOOTING
77
Error Messages
Check # of
Digits
Entered! * The number of digits entered in the bar code data does not
match the number of digits set in the bar code parameters.
Enter the correct number of digits.
Input A,B,C or D
At Start&End! * The bar code data entered does not have the required start/
stop code (A, B, C, or D required at the beginning and end of
the bar code data for the CODABAR protocol). Enter the bar
code data correctly.
Maximum Of
5 Bar Codes
Per Label! * There are already 5 bar codes entered in the text data when
you try to enter a new bar code. You can only use up to five
bar codes in each label.
Category Full! * The memory available for categories is full.
To make more memory available, delete any unnecessary
registered categories by highlighting the category and
pressing the Clear key.
Installed tape is
not compatible with
this machine! * Tape that is incompatible with the machine has been
installed. Use compatible tape.
Message Cause/Remedy
*Press any key to clear the error message.