Philips 40PFL7605H-12 - Manual (Page 20)

EN 19
En
glish
Switch channels
 Press on the remote control or
P/CH +/- on the side of the TV.
 Press , then select [Channel list] to
use the channel list.
 Press to return to the previously-
viewed channel.
 Enter a channel number using the
Numeric buttons.
To view analog or digital channels only
Filter the channel list to access analog or
digital channels only.
1. In the channel list, press .
2. Select [Select list] > [Analogue] or
[Digital], then press OK.
Depending on your selection, only digital or
analog channels become available.
Adjust volume
NonPublish
To increase or decrease volume
 Press +/- on the remote control.
 Press +/- on the side of the TV.
NonPublish
To mute or unmute sound
 Press to mute the sound.
 Press again to restore the sound.
Use the [Sound] menu to adjust headphone
volume. For more information, see Setup
the TV > Change picture and sound
settings > More sound settings (Page
34 ).
Use Smart picture settings
NonPublish
Use the [Smart picture] experience menu
to access frequently-used picture settings.
1. While watching TV, press .
2. Select [Smart picture], then select one of
the following settings:
 [Personal]: Sets the TV to your
personal preferences set in the
[Picture] menus in [Setup].
 [Vivid]: Rich and dynamic settings, ideal
for daylight use.
 [Natural]: A natural picture setting.
 [Cinema]: Ideal settings for watching
movies.
 [Game]: Ideal settings for gaming.
 [Energy saving]: The most energy
conscious settings.