Philips DS3400-37 - Manual (Page 6)

5 EN
Overview of the main unit
a Dock for the iPod/iPhone
b /
• Adjust volume.
• As LED indicators, show system status.
c
• Turn the docking speaker on.
• Switch the docking speaker to standby
mode.
d Power supply socket
• Connect AC power.
e
• Sync with PC through a USB cable.
f AUDIO-IN
• Connect an external audio device.
a
b
c
d
e
f
3 Get started
Always follow the instructions in this chapter in
sequence.
Connect power
This docking speaker can be powered by either
AC power or batteries.
Option 1: AC power
Caution
• Risk of product damage! Make sure that the power
supply voltage matches the voltage printed on the
bottom of the unit.
•
Risk of electric shock! When you unplug the AC
adaptor, always pull the plug from the socket. Never
pull the cord.
Connect the AC power adaptor to:
• the power socket at the back of the
docking speaker.
• the wall socket.
Option 2: Battery power
Caution
• Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
• Remove batteries if they are exhausted or will not be
used for a long time.
• Batteries contain chemical substances, so they should
be disposed of properly.