Hooking up the tv/vcr (cont’d) 7, Helpful hints, Plug in the tv/vcr’s power cord – Philips CCB252AT99 User Manual
Page 7: Before you turn on the tv/vcr, go to page eight
Hooking Up the TV/VCR (cont’d) 7
AUDIO VIDEO
REW
PLAY
F.FWD
POWER
VOLUME
CHANNEL
EARPHONE
STOP
EJECT
REC
OTR
REC
OUT
IN
VIDEO
IN
OUT
3CH
4CH
AUDIO
ANT.
OUT
IN
VIDEO
IN
OUT
3CH
4CH
AUDIO
ANT.
VIDEO
AUDIO
• Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
• Audio and video cables are not supplied.
Helpful Hints
Crooked Pin
Straight Pin
Bent pin
Plug
Cable
Hooking Up Your
TV/VCR to Another
Video Source
(VCR or Camcorder)
You may need this connection
if you want to copy tapes.
Details are on page 31.
AUDIO/VIDEO Jacks
on front of TV/VCR
AUDIO/VIDEO OUT
Jacks on VCR
Use an Audio cable to connect the AUDIO
OUT Jack on the VCR to the AUDIO Jack
on the front of the TV/VCR.
Use a Video cable to connect the VIDEO OUT Jack on
the VCR to the VIDEO Jack on the front of the TV/VCR.
2
Plug in the TV/VCR’s power cord.
3
Before you turn on the TV/VCR, go to page eight.
D.