Philips SHAVER 3HD METAL POUCH - Manual (Page 14)

ENGLISH 27 ENGLISH 26
Storage
C
◗ The razor can be placed in the charging stand
for safe storage. If storing razor in stand,
remove the plug from outlet as soon as the
razor is fully charged.
◗ Be sure razor is turned off. Remove cord from
outlet and razor or charging stand before
storing in a safe, dry location where it will not
be crushed, banged, or subject to damage.
◗ Do not wrap cord around razor or charging
stand when storing.
◗ Store cord in a safe location where it will not
be cut or damaged.
◗ Do not keep razor or charging stand
permanently plugged into outlet.
◗ Do not place or store razor or charging stand
where it can fall or be pulled into a tub or
sink, water or other liquid while plugged in.
C
◗ Put the Protective Razor Head Cap on razor
to protect heads.
Travel Lock
If you are going to travel, it is possible to lock the
razor.The travel lock prevents the razor from
being switched on by accident.
Activating the travel lock
C
◗ Press the ON/OFF button for 3 seconds.
The razor is switched OFF and the key symbol
rotates once.The travel lock is now activated.
After Each Use: Trimmer
1 Turn razor OFF.
2 Push down spring-release trimmer switch.
C
3 Clean trimmer with the brush every time
you use it.
C
4 Lubricate the trimmer teeth with Philips
Norelco Razor Lubricant (model AL80) or
with one drop of mineral oil every 6
months.
5 Close trimmer by pressing trimmer down.
This razor has no other user-serviceable parts.
Any other service should be performed by the
Philips Norelco Service Location.
Replacing the Razor Heads
◗ Replace the razor heads once a year for
optimal shaving results.
◗ Replace damaged or worn razor heads with
model HQ9 Philips Norelco razor heads only.
Razor head check indication
◗ The replacement head indicator symbol starts
blinking to remind you to check if it’s time to
replace your razor heads to obtain optimal
shaving results.