Philips HF3332-60 - Manual (Page 9)

, The timer on-indication and the timer countdown time start to
flash (Fig. 11).
3 Press the plus or minus button to set the session time. If you keep
the button pressed, the time moves forward or backward
quickly (Fig. 9).
You can set a time from 1 to 60 minutes.
, The set session time is stored in the memory.
, The timer-on indication and the timer countdown time stop
flashing.
Note: When you turn on the appliance, the timer counts down the set time.
When the countdown is finished, the LED panel turns off automatically.
Demo mode
The demo mode is used to demonstrate the goLITE BLU energy light in
stores. When the appliance is turned on in demo mode, customers of the
store can:
- adjust the light intensity
- turn the appliance on and off
- set the alarm
- set the light time
If the appliance is not operated for 3 minutes, it reverts to its demo
mode default settings.
To activate the demo mode:
1 Make sure the appliance is turned off.
Note: If you want to turn off the appliance, press and hold the on/off button
for 2 seconds.
2 Put the adaptor in the wall outlet and insert the appliance plug into
socket on the appliance.
3 Press and hold the on/off button for 10 seconds (Fig. 6).
, The appliance turns on and the word ‘DEMO’ appears on the
display.
, The LED panel goes on at a light intensity of 25%.
ENGLISH 14
, The display shows a timer countdown time of 15 minutes, but the
timer does not count down. It only starts to count down when the
timer time is adjusted.
, The display shows an alarm time of 12:00 a.m. and shows the
normal clock time, but the alarm mode is off.
Note: The appliance remains turned on in demo mode until it is turned off.
To deactivate the demo mode, press and hold the on/off button for 10
seconds.
Using the appliance
Use this appliance for its intended household use as described in this
manual.
1 Press the on/off button briefly to turn on the appliance (Fig. 6).
, The touchscreen display goes on.
Note: If you do not touch the display or press any button for 5 minutes when
the display is turned on and the appliance operates on battery power, the
appliance turns off automatically to save battery power.
Note: If you want to turn off the appliance, press and hold the on/off button
for 2 seconds.
2 Briefly press the on/off button again to turn on the LED panel.
, The timer counts down the set time.
Note: The default session time is 15 minutes. Use the timer to change the
session time (see section ‘Setting the timer’ in chapter ‘Preparing for use’).
, When the countdown is finished, the LED panel turns off
automatically.
Note: If you want to turn off the LED panel before the countdown is finished,
press the on/off button briefly.
3 Press the plus or the minus button to change the light
intensity (Fig. 9).
You can increase or decrease the intensity in increments of 25%.
ENGLISH 15