Brocade Communications Systems Brocade EZSwitchSetup 5100 - Manual (Page 33)

EZSwitchSetup Administrator’s Guide 21
53-1002157-01
Connecting devices and completing the setup
2
FIGURE 17 Installing SFPs
2. Connect Fibre Channel cables from the switch to your host and storage devices. Ensure that
the physical connections are exactly as indicated on the Configure Ports and Connect Devices
screen.
a. Remove any plastic protectors from the Fibre Channel cable ends, and position the cable
connector so that it is oriented correctly.
b. Insert the cable connector into the SFP until it is firmly seated and the latching mechanism
clicks.
1 Brocade switch 3 Position SFP and insert until firmly seated
2 Open the SFP bale 4 Close the latching bale
IOIOI
!
scale: 1/2" = 1"
IOIOI
!
3
2
1
1
A
B
4
4-01