Philips AJ3270D-37 - Manual (Page 13)

Connect power
D
Caution
•
Risk of product damage! Ensure that the power voltage corresponds
to the voltage printed on the back or underside of the clock radio.
•
Risk of electric shock! When you unplug the AC adapter, always
pull the plug from the socket. Never pull the cord.
Set clock
1
In standby mode, press and hold SET TIME for two seconds.
» The current time is displayed.
» The hour and minute digits begin to blink.
2
Press HR+/- and MIN+/- repeatedly to set hour and minute.
3
Press SET TIME again to confirm.
» [12H] or [24H] is displayed.
4
Press HR+/- (or MIN+/-) to select 12/24 hour format.
5
Press SET TIME to confirm.
Note
•
When iPod/iPhone is connected, the clock radio synchronizes time
with iPod/iPhone automatically.