Philips AJL700-37B - Manual (Page 17)

17
English
Basic functions
Switching on/ to standby and
selecting functions
1
Press POWER to switch on (or B on the
remote control).
2
To select your function, press SOURCE once
or more (or DVD, RADIO/BAND, TV or AV
on the remote control).
3
Press POWER to switch the set to standby (or
B on the remote control).
Helpful hints:
– In the standby mode, the tone, sound settings,
tuner presets, and the volume level (up to a
maximum volume level of 20) will be retained in
the set’s memory.
Adjusting picture
On the TV screen, you can adjust your picture
settings: Brightness, Contrast, Color and Tint.
1
On the remote control, press PICTURE once
or more to select BRIGHTNESS, CONTRAST,
COLOR and TINT.
2
Press VOL +/- to adjust the value between 00
and 100.
Display information
● During playback, press CLK/DISP to switch
between the clock/timer display and the status of
the set (or on the remote control, DISPLAY).
PRESET
MHZ kHZ
VOL.
MEM
SHUFFLE PROG. 1ALL
TV FM AM TIMER
CLOCK/TUNING CLK/DISP
AJL700 KITCHEN DVD PLAYER
PRESS TO START/STOP
TIMER
CLOCKSET CLOCKSET PICTURE
VOL
DSC
DVD
AV
SHUFFLE
Adjusting volume and sound
Adjusting Volume
● Press VOL +/- to adjust the volume.
➜ Display shows VOLUME and. a number from
00 to 32.
DSC
Digital Sound Control enables you to select
predefined sound settings.
● Press DSC repeatedly to select your desired
sound setting:
➜ CLASSIC, POP, MOVIE or SPEECH is
displayed.
● Press OSD to check your DSC setting.
MUTE
During playback, you can temporarily switch off
the sound without switching off the set.
1
Press MUTE to switch off the sound.
➜ MUTE appears on the TV screen .
Playback continues without sound.
2
To switch on the sound, press MUTE again or
adjust the volume with VOL controls.