Philips 21" Stereo Institutional CTV - Manual (Page 13)

25 24
O
N
-S
CREEN
M
ENU
C
ONTROLS
Y ou can make some adjustments to the TV pic-
ture using the TV PICTURE SETUP or the
VGA PICTURE SETUP on-screen menu. Follow
the steps below for the proper procedure.
Press the SELECT (M) button on the remote
control to see the on-screen menu.
Press the MENU ▼▲ on the remote control
repeatedly to move the highlight to the desired
feature to change or adjust.
Press the MENU ᮤ ᮣ buttons on the
remote control to adjust or change the highlighted
feature.
Press the STATUS/EXIT button on the
remote control to clear the screen when finished.
BEGIN
P
ICTURE
A
DJUSTMENTS
TV P ICTURE S ETUP M ENU
TV PICTURE SETUP
BRIGHTNESS - - - - - - - - - -
PICTURE - - - - - - - - - -
RESTORE PRESETS
EXIT MENU
PRESS + OR – TO CHANGE
TV PICTURE SETUP
BRIGHTNESS - - - - - - - - - -
PICTURE - - - - - - - - - -
RESTORE PRESETS
EXIT MENU
PRESS + OR – TO CHANGE
TV PICTURE SETUP
BRIGHTNESS - - - - - - - - - -
PICTURE - - - - - - - - - -
RESTORE PRESETS
EXIT MENU
PRESS + TO RESTORE
Adjust BRIGHTNESS
using the + or – buttons.
Adjust PICTURE
using the + or – buttons.
RESTORE PRESETS
using the + button.
W hen viewing normal broadcast channels only the
BRIGHTNESS and PICTURE controls can be
changed, or the TV can be restored to its PRESETS
(RESTORE PRESETS). This menu can be accessed by
the MENU or ADJUST buttons on the remote.
TV PICTURE SETUP
BRIGHTNESS - - - - - - - - - -
PICTURE - - - - - - - - - -
RESTORE PRESETS
EXIT MENU
PRESS + OR - TO EXIT
EXIT the menu using
the + or - buttons.
S canCard II has two different operation modes;
Consumer and Commercial. When in the Consumer
mode, all available menu items and tuning options are
fully enabled (with the exception of the COMMER-
CIAL SETTING menu). Access to ScanCard II’s inter-
nal “TV PICTURE SETUP,” “VGA PICTURE
SETUP,” and the TV’s “SETUP” menus can be select-
ed with the supplied ScanCard II remote control. When
in the Commercial mode, limited menu access can be
obtained. Only the “TV PICTURE SETUP,” and
“VGA PICTURE SETUP” menus are accessible with
the supplied ScanCard II remote control.
Brightness Control - Press the (+) or (-) button to adjust
the brightness to the desired level. The (+) button increases
the picture BRIGHTNESS while the (-) button will
decrease the picture BRIGHTNESS.
Picture Control - Press the (+) or (-) button to adjust the
picture quality. This controls the pictures clarity and con-
trast.
Restore Presets - Pressing the (+) button will restore the
menu options back to the preset options set by the setup
technician.
Exit Menu - Press the (+) or (-) button to clear the on-
screen menu from the picture.
TV P ICTURE S ETUP D ESCRIPTIONS
SCAN 2 10/3/00 10:49 AM Page 24