Bose 336 - Manual (Page 5)

5
I NTRODUCING THE S OUND D OCK TM D IGITAL M USIC S YSTEM
English Deutsch Français Dansk Español Italiano Svenska Nederlands
Using the correct insert
Before you enjoy the sound, you need to install the proper insert
in the dock on the front of the system. Then you can plug the
system in.
To install the proper insert:
1. Check the bottom of each insert for the label that identifies it
as A, B or C.
2. In the chart on the right, locate your iPod and the mark that
indicates which insert it works with: A, B or C.
Note: Using the correct insert ensures the proper fit for your iPod.
3. Position the selected insert over the dock.
4. Press on both sides of the insert until it sits firmly in place
(Figure 3).
Figure 3
Installing an insert
Note: You can remove and replace this insert with the other one that
is provided. This allows you to use the system with iPods of
different sizes. For details, see “To remove an insert from the dock”
on page 9.