Philips AZ1123B-37B - Manual (Page 5)

Playing a CD
• This CD player plays Audio Discs including
CD-Recordables (CD-R) and CD-Rewritables
(CD-RW).
• MP3, CD-ROM, CD-I, CDV, VCD, DVD or
computer CDs are not possible for playback.
IMPORTANT!
CDs encoded with copyright protection
technologies by some record companies may
be unplayable by this product.
1 Adjust the Source selector to CD.
2 Open the CD door.
3 Inser t a CD with the printed side facing up,
then press the CD door gently to close.
➜ Display shows --, and later the total
number of tracks. (See 2)
4 Press 2; to start playback.
5 To pause playback, press 2;.
➜ Display: 2 flashes. (See 3)
6 To resume, press 2; again.
7 To stop CD playback, press 9.
Helpful hints:
CD play will also stop when:
– you open the CD door;
– you select FM, AM or OFF;
– the CD has reached the end.
Selecting a different track
• Press ∞/ § once or repeatedly until the
desired track number appears in the display.
• In the pause/stop position, press 2; to start
playback.
Finding a passage within a
track
1 During playback, press and hold ∞ or § .
➜ The CD is played at high speed and with
reduced volume.
2 When you recognize the passage you want,
release
∞ or § to resume normal playback.
Helpful hints:
– When your searching reaches the end of the
last track, the CD goes to stop mode.
Programming track
numbers
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press PROG to
activate programming.
➜ Display: PROG and 00 flash. (See 4)
2 Press ∞ or § to select your desired track
number.
3 Press PROG to store the desired track
number.
➜ Display: PROG and 00 flash for you to
program the next track.
4 Repeat steps 2 to 3 to select and store all
desired tracks in this way.
➜ If you attempt to store more than 20
tracks, no track can be selected and the
display shows flashing -
-- -.
5 To play your program, press 2;.
Helpful hints :
– When playback of your program comes to
the stop position, your set will return to nor-
mal playback. To re-enter program mode,
press PROG in the stop position.
Reviewing the program
In the stop position, press PROG repeatedly
to see your stored tracks.
Erasing a program
You can erase the contents of the memory
by:
– in the stop position, press PROG to enter
program mode, and then press 9;
– selecting FM, AM or OFF;
– opening the CD door.
Different play modes:
REPEAT and SHUFFLE
(See 5 , 6)
REPEAT
You can play the current track or the whole
disc repeatedly, and combine REPEAT modes
with PROGRAM.
REP – plays the current track continuously.
REP ALL – repeats the entire CD/program.
1 To select play mode, press REPEAT once or
more.
➜ The display shows REP or REP ALL.
2 Press 2; to start playback if in the
stop/pause position.
3 To return to normal playback, press
REPEAT repeatedly until the modes are no
longer displayed
.
– You can also press 9 to cancel your play
mode.
SHUFFLE
You can play all the tracks in random order.
1 In the stop position, press SHUFFLE to
switch on shuffle play.
➜ Display shows SHUF.
2 To switch off shuffle play, press 9.
Helpful hints:
– During the shuffle play, when REP function is
selected, it will play the current shuffled track
repeatedly, or when the REP ALL function is
selected, it will repeat the shuffle play of the
entire CD.
– Shuffle play is not available in the program
mode.
CD Player CD Player