Philips HD8773-47 - Manual (Page 43)

41 ENGLISH 41
6 This icon is displayed during preheating time required by the machine.
Y
ello
w
Gr
een
7 When the desired amount of froth milk is reached, press the “ ” but-
ton.
Now the “froth milk” button is programmed. Every time it is pressed, the
machine will brew the same amount of froth milk that was programmed.
DISPENSING HOT WATER
Warning:
Danger of burning! Dispensing may be preceded by short sprays of
hot water and steam. Danger of burning! Wait until the end of the
cycle before removing the water dispensing spout.
1 Slightly tilt the water dispensing spout and insert it all the way in into
the guides of the machine.
2 Push the water dispensing spout towards the bottom while rotating at
the same time, until it is locked in the machine as shown in the fi gure.