Philips AEA7100-17 - Manual (Page 12)

10 EN
7
Use -/+ on the top of the Bluetooth ®
speaker to adjust volume.
Note
• If no prompt pops up on your iPad at step 1, you can
go to Settings -> General -> About -> AEA7100 ->
Find App for Accessory to install the app.
Tip
•
If automatic pairing fails, press and hold on the
speaker for more than 10 seconds to pair the
microphone with the speaker manually.
•
If the wireless microphone remains disconnected from
the Bluetooth ® speaker for more than 15 minutes, it
switches to standby mode automatically. To switch it
on again, you need to slide the OFF/ON switch on the
microphone to theOFF position and then slide back to
the ON position.
• You can use controls available on the app to adjust
sound effects.
•
If you experience howling or echo, try to increase
the distance between the microphone and speaker
or adjust the angle of the microphone towards the
speaker.
Play from a Bluetooth ®
enabled device
Note
• The effective operation range between the Bluetooth ®
speaker and your Bluetooth ® enabled device is
approximately 10 meters (30 feet).
• To pair with a Bluetooth ® enabled mobile device, make
sure that: no iPad is docked; or you have stopped music
play and exited StarMaker Karaoke + Auto-Tune ® on
your docked iPad.
•
To pair with a new mobile device, you can press to
remove the existing Bluetooth ® connection.
• To play from a Bluetooth ® enabled device, make sure
that you are not playing music from your iPad docked
on the Bluetooth ® speaker.
1
Press on the top of the Bluetooth ®
speaker.
» The Bluetooth ® indicator flashes blue
quickly.
2
Enable Bluetooth ® on your device
that supports A2DP (Advanced Audio
Distribution Profile).