Philips 32PF9996-37 - Manual (Page 16)

12
Press the MENU button on the remote control to summon the main menu.
Note: Dependent on the input signal, one or more menu items may not be selectable.
Press the INFO button on the remote control to get information about the selected
menu item.
Note: Some menu items are not available in case of
HD sources.
& Press the cursor right to select Picture .
é Select the menu items in the Picture menu with
the cursor up/down.
“ Adjust the settings with the cursor left/right or
enter the list of submenu items with the cursor
right. Select a submenu item with the cursor
up/down.
Note: To remove the menu background before
adjusting the picture settings, see Select TV Settings,
General, p. 8.
Auto picture
Select Auto picture to display a list of
predefined picture settings, each corresponding
with specific factory settings.
Personal refers to the personal preference
settings of picture in the picture menu.
Note: this Philips Flat TV has been set at the factory
to look best in bright store environments which
typically use florescent lighting. As your home will
likely not be as well lit as a store, we recommend
that you cycle through the various Auto Picture
modes to find the one that best suits your own
viewing conditions. Most consumers will find that
Natural is the correct choice.
Digital processing
• Standard = line doubling eliminates line flicker.
• Pixel Plus = For everyday viewing, Pixel Plus
is the most ideal setting, as it fully processes
the image to make every single pixel the best it
can be, improving contrast, sharpness, picture
depth, and color reproduction and brilliance
from every source, including High Definition.
For the most optimum motion reproduction of
all source materials, select the
Movie Plus
setting. Standard Mode is recommended only
for very noisy or poorly mastered sources or
for those who find the smoothness of Pixel
Plus (which eliminates jutter in the picture)
unsettling.
Dynamic contrast
Automatically makes the contrast in the darker
and the brighter picture areas more noticeable
as the image on the screen changes.
Normally, select
Medium . It may be preferred
to select Minimum , Maximum or Off .
& Press the cursor right to enter the list.
é Select one of the settings with the cursor
up/down.
“ Press the cursor left to return to the picture
menu.
DNR (Digital Noise Reduction)
Automatically filters out and reduces the image
noise and improves picture quality when
receiving weak video signals.
& Press the cursor right to enter the list.
é Select Off , Minimum , Medium or Maximum
according to the image noise.
“ Press the cursor left to return to the picture
menu.
Picture Sound Ambilight Features Channels
Auto picture
Contrast
Brightness
Color
Sharpness
Color temperature
Digital processing
Dynamic contrast
DNR
Color enhancement
Tint
Picture format
TV
Picture menu
TV menu