Brinkmann Heavy-Duty Charcoal Grill - Manual (Page 8)

7
Step 11
Attach one half of each hinge to the
outside back of the body using
6 X 28 mm Phillips head bolts and
6 X 5 mm hexagonal nuts. Thread bolts
into nuts but do not tighten. Attach the
other half of each hinge to the outside
back of the lid using 6 X 28 mm Phillips
head bolts and 6 X 5 mm hexagonal nuts.
Thread bolts into nuts but do not tighten.
Step 12
Rest lid on the body and align hinges to
insert hood pivot pins. Insert cotter pins
into hood pivot pins and bend ends out
slightly. Tighten all hinge screws on lid
and grill body until secure.
Step 13
Slide charcoal grate adjuster arm onto
control arm. Insert adjuster lock pin and
spring into hole in end of adjuster arm as
illustrated and tighten securely.
NOTE: With the adjuster arm trigger at its
lowest level, tighten adjuster lock pin
clockwise into the end hole of
adjuster arm.
Step 14
With the charcoal grate at its lowest level,
slide the adjuster lock pin into the first
hole of the adjuster arm guide. Attach
adjuster arm guide onto side of grill and
thread 6 X 15 mm Phillips head bolts into
welded nuts on inside of grill. Tighten
securely.
Control
Arm
Adjuster
Arm Guide
Adjuster Lock Pin
Adjuster Arm
Cotter Pin
Hood Pivot Pin
INSTR-Pro Grill Smoker 2/11/02 3:55 PM Page 8