Basic functions, Demonstration mode, Switching the system on – Philips FWM575-37B User Manual
Page 15: Switching the system to eco power standby mode, Dim mode, Volume control
15
English
Basic Functions
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
●
In standby mode, press and hold
Çon the
system for 5 seconds to switch to
demonstration.
To deactivate the demonstration
●
Press and hold
Çon the system for 5 seconds to
switch to standby mode.
Switching the system on
●
Press
STANDBY-ON/ECO POWER (
2).
➜
The system will switch to the last selected
source.
●
Press
CD/USB, TUNER, TAPE (TAPE 1/2)
or
AUX.
➜
The system will switch to the selected
source.
●
Press
OPEN•CLOSE, DISC 1/2/3(CD 1/2/
3) or DISC CHANGE.
➜
The system will switch to the disc source and
the disc tray will open.
Switching the system to Eco
Power Standby mode
●
Press
STANDBY-ON/ECO POWER (
2) in
the active mode.
➜
The system enters Eco power standby (the
ECO POWER LED is on) or normal standby
with clock display.
●
If the system is in normal standby with clock
display, press and hold
STANDBY-ON/ECO
POWER (
2) for 3 seconds or more to
switch to Eco power standby or vice versa.
Dim mode
You can select the desired brightness for the
display.
●
In any source mode, press
DIM repeatedly to
select DIM 1, DIM 2, DIM 3 or DIM OFF display
mode.
➜
DIM
is shown, except for DIM OFF mode.
Volume control
Adjust
VOLUME to increase (turn knob
clockwise or press
VOLUME
+) or decrease
(turn knob anti-clockwise or press
VOLUME
-) the sound level.
To listen through the headphones
●
Connect the headphones plug to
the n socket at the front of the
system.
➜
The speakers will be muted.
To switch off the volume temporarily
●
Press
MUTE on the remote control.
➜
Playback will continue without sound and
"
MUTE" is displayed.
●
To restore the volume, press
MUTE again or
increase the volume level.
pg001-pg031_FWM575-Eng-37
2006.2.8, 13:16
15