B&B Electronics Modem - Manual (Page 10)

1.815.433.5100 www.bb-elec.com 71
C
o
m
m
u
n
ic
a
ti
o
n
E
th
e
rn
e
t
W
ir
e
le
ss
S
e
ria
l
U
S
B
Lighting Arrestors &
MOCAP Silicone Installation Tape
Protect your antenna from weather
Antenna options
When installed properly in the feedline, a lightning arrestor
can prevent antenna damage due to lightning strikes. These
units are designed with a rugged housing and high quality
plated brass “N” connectors. Features – Lighting Arrestors
• Impedance: 50 Ohms (nom.)
• Connector 1: N female
• Connector 2: N female (bulkhead)
Mounting
Model No. Frequency Gain Style Connector Dimensions Bracket Price
FG24008 2.4 GHz 8 dB Omni (fiber glass) N female 24 in (60.9 cm) long FM2 $194.95
YE240015 2.4 GHz 12.5 dB Yagi N female 18 in (45.7 cm) long Included 244.95
FG9023 900 MHz 3 dB Omni (fiber glass) N female 25 in (63.4 cm) long FM2 139.95
FG9026 900 MHz 6 dB Omni (fiber glass) N female 65 in (165.1 cm) long FM2 179.95
YS8963 900 MHz 6 dB Yagi N female 16.8 in (42.7 cm) long Included 69.95
YS8966 900MHz 9dB Yagi N female 27.8 in (70.6 cm) long Included 89.95
YS89612 900MHz 11dB Yagi N female 49 in (124.5 cm) long Included 154.95
FM2 Brackets for Omni-directional antennas, package of two (used for one antenna) 29.95
For long range point-to-point applications, use Yagi antennas. Multi-point applications may require a mixture of Yagi and Omni-directional antennas.
FG24008
FG9023
Shown with optional FM2 brackets
LABH350NN LABH2400NN
Cables to connect optional antennas
Max. Breakdown Insertion
Model No. Power Voltage Loss VSWR Protection Configuration Price
LABH350NN 1000 W 350 VAC 27 to 500 MHz < 0.1 dB 0 to 150 MHz < 1.1 to 1 5000 A Bulkhead, Pass-through $78.95
0 to 1 GHz 1000 MHz < 0.25 dB 150 to 1000 MHz < 1.2 to 1
LABH2400NN 70 W 90 to 130 0 to 1 GHz < 0.03 dB 0 to 1 GHz < 1.1 to 1 1 shock = 20 kA Bulkhead, Pass-through 78.95
0 to 4 GHz VAC 1 to 4 GHz < 0.29 dB 1 to 4 GHz < 1.2 to 1 10 shocks = 10 kA
LAIL350NN 1000 W 350 VAC 27 to 500 MHz < 0.1 dB 0 to 150 MHz < 1.1 to 1 5000 A In-line applications NEW! 78.95
0 to 1 GHz 1000 MHz < 0.25 dB 150 to 1000 MHz < 1.2 to 1
Features & Benefits – Silicone Installation Tape
• Save installation time and labor
• Protect valuable equipment
• Material will not crack or melt in temperatures from -51 to 260° C
• Dielectric strength of 400 Volts per mil
• Tensile strength of 600 psi
• Insulates to 8000 Volts
Model No. Description Price
IASFST10 MOCAP tape - (6) ten inch strips, 1 inch wide $5.95
IASFST MOCAP tape - 36 foot roll, 1 inch wide 29.95
IASFST IASFST10
Easy-to-use self-fusing installation tape bonds to itself in
seconds forming a permanent air and water tight seal within 24
hours. Adhesive-free formula leaves no sticky residue after
removal. Stretches up to 300% allowing it to conform to any
shape. Safe replacement for heat shrinkable sleeving. Ideal for
termination splicing, wire connections, bundling wires and
cables, masking applications and quick emergency repairs.
Model No. Connector 1 Connector 2 Length Material Price
195M-SLSW-24 SMA Reverse polarity plug RPSMA Jack bulkhead 2 ft LMR195 $29.95
400M-NMSL-24 SMA Reverse polarity plug N Male 2 ft LMR400 29.95
400M-NISL-24 SMA Reverse polarity plug N Bulkhead (female) 2 ft LMR400 32.95
400M-NMSL-120 SMA Reverse polarity plug N Male 10 ft LMR400 49.95
400M-NMSL-240 SMA Reverse polarity plug N Male 20 ft LMR400 59.95
400M-NMSL-600 SMA Reverse polarity plug N Male 50 ft LMR400 119.95
400M-NMTL-24 TNC Reverse polarity plug N Male 2 ft LMR400 29.95
400M-NITL-24 TNC Reverse polarity plug N Bulkhead (female) 2 ft LMR400 32.95
400M-NMTL-120 TNC Reverse polarity plug N Male 10 ft LMR400 49.95
400M-NMTL-600 TNC Reverse polarity plug N Male 50 ft LMR400 119.95
400M-NMNM-120 N Male N Male 10 ft LMR400 39.95
400M-NMNM-240 N Male N Male 20 ft LMR400 59.95
400M-NMNM-480 N Male N Male 40 ft LMR400 99.95
400M-NFNM-120 N Female N Male 10 ft LMR400 39.95
400M-NFNM-480 N Female N Male 40 ft LMR400 99.95
YE240015
YS8963 Wireless Accessories
Antenna and cabling options
for longer range & special
applications