Philips BDP2700-05 - Manual (Page 8)

8
Tip
If the TV has a DVI connector only, connect via an •
HDMI/DVI adaptor. Connect an audio cable for sound
output.
If there is a blank screen under HDMI connection, on the
•
remote control press and then press “731” (numeric
buttons) to recover picture display.
If this player connects to a TV compatible with 1080p
•
or 1080p/24Hz, Philips recommends HDMI category 2
cable, also known as High Speed HDMI cable, for optimal
video and audio output.
To play the digital video images of a BD-video or DVD-
•
video via an HDMI connection, it is necessary that both
this player and the display device (or an AV receiver/
amplifier) support a copyright protection system called
HDCP (high-bandwidth digital content protection
system).
This connection provides best picture quality.
•
Option 2: Connect to the composite
video jack
1 Connect a composite video cable to:
the • VIDEO (CVBS) jack on this player.
the VIDEO input jack on the TV. •
2 Connect the audio cables to:
the • AUDIO OUT jacks on this player.
the AUDIO input jacks on the TV. •
Tip
The video input jack on the TV might be labeled as A/V •
IN, VIDEO IN, COMPOSITE or BASEBAND.
Route audio to other devices
You can route the audio from this player to other
devices.
VIDEO IN
AUDIO IN
3 Connect
AV cables are separately sold.
Make the following connections to use this player.
Basic connections:
Video •
Audio •
Power •
Optional connections:
Route audio to other devices •
HDMI-compliant AV receiver/amplifier •
Digital AV amplifier/receiver •
Analog stereo system •
USB device
•
LAN (network) •
Note
Refer to the type plate at the back or bottom of the •
product for identification and supply ratings.
Before you make or change any connections, ensure that
•
all the devices are disconnected from the power outlet.
Connect video/audio cables
Select the best video connection that the TV can
support.
•
Option 1: Connect to the HDMI jack (for a
HDMI, DVI or HDCP-compliant TV).
• Option 2: Connect to the composite video
jack (for a standard TV).
Option 1: Connect to the HDMI jack
1 Connect an HDMI cable (not supplied) to:
the • HDMI jack on this player.
the HDMI input jack on the TV. •
HDMI IN
EN